What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

Linearní teplot. hlásič LWM-1

761290

Approval: VdS

The LWM-1 enables early detection of fires or overheating. It is specifically designed for application in narrow rooms or rough environmental conditions. The system consists of an LWM-1 evaluation unit and a special sensor cable, which must be selected according to the type of application. The actuation on the loop and the resetting function is carried out via the esserbus transponder Part No. 808623.
Actuation on a conventional line is carried out via the same transponder. The device requires a separate voltage supply of 24V DC for the galvanic separation of D.C. voltage potentials and the voltage converter Part No. 781337 must be used in order to avoid ground faults.

Vlastnosti & Výhody
Technické údaje
Příslušenství
Dokumenty

Maximum sensor cable length of 300 m
Resistant against mechanical and chemical impact, corrosion, humidity and dust
Calibration switch setting
VdS approval as per EN 54-5 A1 applicable up to 7.5 m ceiling height
Suitable for application in hazardous areas
Early fire detection with heat detector classes A1, A2, B and C
High chemical and / or mechanical resistance by using special sensor cables
3 floating relay contacts for fire and fault signalling
Separate reset input for resetting via esserbus transponder 808623 during loop operation

Additional Information:
For application in Ex areas please read the instructions in the manual.

Display	LED green: in operation, permanent light; LED red: alarm diff., permanent light, locked; LED red: alarm max., permanent light, locked; LED yellow: fault, flashing light, locked
Operating voltage	10 ... 30 V DC
Starting current @ 24 V DC	< 100 mA
Color	gray similar to RAL 7035
Weight g	approx. 550 g
Material	ABS plastic
Range	max. 300 m, dependent on ambient temperature
Air humidity	< 95 % (non-condensing)
Quiescent current @ 24 V DC	approx. 25 mA
Type of protection	IP65
Maximum sensor length	max. 300 m
Current consumption @ 24 V DC	approx. 25 mA (DIFF- or MAX-alarm)
Current consumption in the case of failure	max. 15 mA
Temperature range	-20 °C ... 50 °C
VdS class	F
VdS-Nr	G 205066
Dimensions	W: 200 mm H: 120 mm D: 80 mm

Albania	English
Austria	Deutsch
Bosnia and Herzegovina	English
Bulgaria	English
Croatia	English
Cyprus	English
Estonia	English
Greece	English
Hungary	English
Kosovo	English
Latvia	English
Lithuania	English
Macedonia	English
Montenegro	English
Poland	Polskie
Romania	Română
Russia	Россия
Serbia	English
Slovakia	čeština
Slovenia	English
Turkey	Türk
Ukraine	English

Europe

Naše technologie

Linearní teplot. hlásič LWM-1

761290

Vlastnosti & Výhody

Technické údaje

Příslušenství

Dokumenty