What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

Line heat detector Honeywell DTS - evaluation unit, distance range 4 km

970123.IN

Approval: VdS, UL, ATEX, LPCB

DTS (Distributed Temperature Sensing) System is capable of detecting fires and accurately locate spots of the fire. The system allows to precisely measure, locate and signalize already small differences of temperature changes by measuring and highlighting temperature of a specific spot vs. environment. Fire resistant (PH category) sensing cable is capable to take signals also during a fire, even when temperatures are up to 750°C (max. two hours). That allows to monitor the progress of fire and supervise fire rescue action accordingly.
The system can work as a standalone system or be easily integrated into existing management platforms (e.g. SCADA systems) by either communicating directly over Ethernet (TCP/IP) using SCPI (standard commands for programmable instruments) or Modbus (IP or RTU).

Evaluation unit in a 19" rack mount housing.

Vlastnosti & Výhody
Technické údaje
Příslušenství
Dokumenty

Multicolor LCD display
LED indicators: Alarm, Measurement, Fault, Operation
Temperature measurement and monitoring via fiberoptic sensor cable (Part No. 970150.IN or 970153.IN)
1, 2 or 4 measurement channels per evaluation unit
Loop or open line sensor cable topology
Up to 256 independent alarm zones per channel
Up to 10 km sensor cable for each channel
Laser power below 20 mW
10 seconds measurement cycles
Spatial resolution 0.5 m
Relay interface, optionally Modbus IP/RTU
Bidirectional, full digital integration with ESSER by Honeywell fire alarm systems

Operating voltage	10 ... 30 V DC
Power consumption	approx. 17 W @ 20 °C ambient temperature
Operating temperature	-10 °C ... 60 °C
Storage temperature	-40 °C ... 80 °C
Air humidity	< 95 % (non condensing)
Type of protection	IP30
Weight	approx. 9 kg
Dimensions	W: 448 mm H: 88 mm D: 364 mm 2 HU, 19"
Detection Range	4 km

Albania	English
Austria	Deutsch
Bosnia and Herzegovina	English
Bulgaria	English
Croatia	English
Cyprus	English
Estonia	English
Greece	English
Hungary	English
Kosovo	English
Latvia	English
Lithuania	English
Macedonia	English
Montenegro	English
Poland	Polskie
Romania	Română
Russia	Россия
Serbia	English
Slovakia	čeština
Slovenia	English
Turkey	Türk
Ukraine	English

Europe

Naše technologie

Line heat detector Honeywell DTS - evaluation unit, distance range 4 km

970123.IN

Vlastnosti & Výhody

Technické údaje

Příslušenství

Dokumenty